Desktop Divider Panel Bracket

■ Made from Aluminium (sfot pad supplied for protetion)

■ Finish: Silver / Black / White

■ For 4mm - 8mm Glass Panel or Acrylic Sheet / Perspex / Plexiglas

            ■ No hole needed in glass / acrylic

SAFETY ADVICES:
The choice of material and the size of the panels must be determined from installer and/or user in accordance to the intended use and location. Sufficient stability must be ensured at all times. If necessary, several clamps are to be used or additional safety precautions have to be taken. Use for indoors applications only, avoid drafts.

When using glass, it must be ensured that it is always thermally toughened (fully tempered glass or laminated glass out of fully tempered glass).

If glass is used, it must be ensured that permanent direct metal-glass contact is avoided at all costs.

SAFETY ADVICES:
We wold not recommend to use these clamps with high panels (i.e. H=800mm). If the panel height is over 600mm, more than 2 clamps are recommended and if the panel is over 1400mm long, we also suggest using more than 2 clamps. The choice of material and the size of the panels must be determined from installer and/or user in accordance to the intended use and location. Sufficient stability must be ensured at all times. If necessary, several clamps are to be used or additional safety precautions have to be taken. Use for indoors applications only, avoid drafts.

When using glass, it must be ensured that it is always thermally toughened (fully tempered glass or laminated glass out of fully tempered glass).

If glass is used, it must be ensured that permanent direct metal-glass contact is avoided at all costs and make sure the glass can withstand compression when tighten the clamp.